Hi-Gear·Sealants
Super putty Hi-Gear «Quick Steel»
Main advantages
- Reinforced with steel — more reliable than epoxy resin
- Withstands up to +260 °C — holds hot units
- Sets in 5 min, hardens in 1 hour — quick repair
- Works underwater — leak repair
Overview
About this product
Super putty «Quick Steel» an indispensable product for home and garage! The steel-reinforced super putty bonds parts made of different materials more reliably than epoxy resin. Can be used even under water.
Purpose
For quick and reliable joining and repair of parts made of steel, cast iron, non-ferrous metals, acrylic glass, plastic, glass, ceramics, porcelain, wood, etc. Repairs leaks in heating pipes, plumbing and sewerage.
Advantages
Has excellent adhesion to all materials.Withstands high temperature — up to +260 °C.Is not dissolved by automotive fluids.Is easily kneaded by hand.Sets in 5 minutes, polymerises in 15 minutes, hardens in 1 hour.
Application
Treat the parts at the joints with sandpaper and clean off dirt.Cut off the required amount of the compound and knead it thoroughly with wet hands until a mass of uniform colour is obtained. The compound should warm up and become plastic and sticky.Apply to the surfaces being repaired and, if possible, hold for 5 - 10 minutes.
The mass can be given any shape.When repairing under water or on an oily surface, press the compound until it feels stuck to the surface and the leak stops, holding for 5 - 10 minutes until it hardens.
Note
To restore the condition if the outer layer of the putty has hardened as a result of long storage or sharp temperature fluctuations, heat the product to +65 °C and then let it cool to +20 °C.
Specifications
Fluid profile
| Brand | Hi-Gear |
|---|---|
| Type | Sealant |
| Product type | Паста |
| Package | 57 L |
| Form | Liquid |
| Country of origin | USA |
| Package unit | L |
Vendor offers
ADAM finds the vendor
No vendor yet. ADAM finds one and replies within 24 h.
Questions & answers
What farmers ask most
- Match the API/ACEA classifications shown in the specs against your engine manufacturer's recommendation (in the service manual). Tier 4 Final diesels require low-SAPS or mid-SAPS oils — this is always called out in the name.
Product specifications are compiled from publicly available manufacturer sources and are provided for guidance only — confirm all details with the vendor before purchase. Brand names, logos and trademarks are the property of their respective owners; a listing on ADAM does not imply affiliation, sponsorship or endorsement.