Tyre sealant Hi-Gear Tire Doc Anti-Puncture

Tyre sealant Hi-Gear Tire Doc Anti-Puncture - intended for the rapid repair of tyres. The product eliminates holes with a diameter of up to 6 mm in tyres of any type, tubed and tubeless. It can be used as a means of emergency repair or of preventive protection against punctures. 

Advantages:

it does not accumulate at the bottom of the wheel while the vehicle is parked and does not affect the balancing of the wheels;it retains its characteristics in any weather conditions;it forms an elastic strong plug inside the puncture, similar to "raw rubber";it contains carbon fibre, which has a higher specific strength than steel, and polymers that are used in body armour;it absorbs moisture without drying out inside the wheel and prevents corrosion of the wheel rims;one "filling" permanently eliminates dozens of small punctures or 8-10 punctures with a diameter of 5-6 mm;it eliminates air leaks through the pores of the rubber and the valve cores;it extends the service life of the wheels by 20 - 25 %.

Methods of application

The wheel is not punctured: shake the contents of the bottle. Cut off the nozzle of the bottle. Turn the wheel so that the valve is at the bottom and slightly to the side. Unscrew the valve core, release the air. Insert the nozzle of the bottle into the valve and squeeze the required amount of the compound into the wheel. Screw in the valve core and inflate the wheel to the required pressure. After this it is necessary to drive 2-3 km. At first an imbalance of the wheels may be felt, which disappears after the compound has been distributed evenly inside the wheel. The wheel is punctured: try to find and remove the object that pierced the wheel. Then follow point 1. Check the air pressure in the wheel. The contents of the bottle are intended for treating one 13-inch wheel.