Hi-Gear·Coolants
7-minute cooling system flush Hi-Gear
Main advantages
- Removes local cylinder wall overheating — less cylinder-piston wear
- Removes scale, rust and greasy deposits — clean system
- Restores circulation in radiator tubes — fluid flows
- Protects the pump seal from abrasive — prevents destruction
Overview
About this product
The product is guaranteed to clean even a heavily contaminated cooling system of scale, fatty deposits, rust and antifreeze decomposition products.
Advantages
Eliminates local overheating of the cylinder walls («hot spots») that has arisen from clogging of the cooling jacket with scale and leads to increased wear of the cylinder-piston group and subsequently to engine breakdown through seizure.Restores the circulation of coolant through radiator tubes clogged with deposits.Reduces the likelihood of engine overheating when driving in traffic jams.Protects the pump seal from destruction by abrasive impurities and by the decomposition and oxidation products of ethylene glycol.
Application
Switch off and cool down the engine.Fully open the heater tap, if one is provided in the design.Drain the existing coolant from the system.Thoroughly mix the contents of the pack with 4 – 5 l of water.Pour the solution into the cooling system, bringing the level up to normal with water.Run the engine for 7 minutes, keeping the crankshaft speed at 1500 – 2500 rpm.Switch off and cool down the engine and drain the fluid completely.Flush the system with clean water and fill it with antifreeze.
After filling with coolant, the vehicle can be operated in the normal mode.
The pack is designed for a cooling system with a volume of up to 17 l.
Do not store an opened pack, use the product completely.
Specifications
Fluid profile
| Brand | Hi-Gear |
|---|---|
| Type | Coolant |
| Product type | Liquid |
| Package | 325 L |
| Form | Liquid |
| Country of origin | USA |
| Package unit | mL |
Vendor offers
ADAM finds the vendor
No vendor yet. ADAM finds one and replies within 24 h.
Questions & answers
What farmers ask most
- Match the API/ACEA classifications shown in the specs against your engine manufacturer's recommendation (in the service manual). Tier 4 Final diesels require low-SAPS or mid-SAPS oils — this is always called out in the name.
Product specifications are compiled from publicly available manufacturer sources and are provided for guidance only — confirm all details with the vendor before purchase. Brand names, logos and trademarks are the property of their respective owners; a listing on ADAM does not imply affiliation, sponsorship or endorsement.