Antifreeze 5-minute engine flush Hi-Gear Motor Flush — metal can with a pink label, front view

Hi-Gear·Coolants

5-minute engine flush Hi-Gear Motor Flush

No reviews yet

Main advantages

  • Additives form an emulsion — particles do not touch parts
  • Removes varnish deposits — continuous oil film
  • Safe for seals and oil seals — no damage

Overview

About this product

Hi-Gear Motor Flush removes carbon deposits from the passages of the lubrication system and from the internal cavities of the engine, making it possible to clean the engine radically.

Advantages

It is guaranteed to remove carbon, sludge and deposits from the passages of the lubrication system and the internal cavities and improves oil circulation and heat removal from the engine parts.It helps to create a continuous oil film on the engine parts by removing varnish and non-wettable deposits.It restores the mobility of the oil scraper and compression rings.It is safe for rubber seals, oil seals and valve stem seals.It contains special additives that create an emulsion which envelops the particles of wear products, carbon and deposits and prevents their contact with the engine parts.It is compatible with all types of oils and engines, including turbocharged ones.

Application

Warm up and switch off the engine.

Pour the flush into the oil filler neck in accordance with the stated proportions.

Start the engine and let it run for 5 min. at idle (heavily contaminated engines 10 min.).

Switch off the engine.

Drain the oil. Replace the filter and fill in fresh oil.

4-cylinder engines

for a scheduled oil change on engines with a mileage of up to 70 000 km, it is enough to use 450 ml of the product;for flushing heavily contaminated engines use 630 ml of the product and flush for 10 minutes.

6-8-cylinder engines

for engines with a displacement of more than 2.5 l and a lubrication system of more than 4 l use in the proportion: 160 ml of the product per 1 l of oil. In this case it is necessary to make sure that while the flush is being poured in, the maximum oil level in the sump set by the manufacturer is not exceeded.

Specifications

Fluid profile

BrandHi-Gear
TypeCoolant
Product typeLiquid
Package3.78 L
FormLiquid
Country of originUSA
Package unitL

Vendor offers

ADAM finds the vendor

No vendor yet. ADAM finds one and replies within 24 h.

Questions & answers

What farmers ask most

  • Match the API/ACEA classifications shown in the specs against your engine manufacturer's recommendation (in the service manual). Tier 4 Final diesels require low-SAPS or mid-SAPS oils — this is always called out in the name.

Product specifications are compiled from publicly available manufacturer sources and are provided for guidance only — confirm all details with the vendor before purchase. Brand names, logos and trademarks are the property of their respective owners; a listing on ADAM does not imply affiliation, sponsorship or endorsement.

+380 (67) 419-07-94

Contentsquare stores its data in the EU (Ireland). Google Analytics transfers data to the United States, under EU Standard Contractual Clauses.