Rust preventative Gravitex Hi-Gear Rubberized Undercoating Black Beauty — aerosol can with a black cap, front view

Hi-Gear·Coatings

Gravitex Hi-Gear Rubberized Undercoating Black Beauty

No reviews yet

Main advantages

  • Rubber and bitumen — flexible underbody protection
  • Extension tube — treats internal cavities
  • Displaces water from gaps — waterproof layer
  • Stays pliable — does not crack in frost

Overview

About this product

Gravitex Hi-Gear Rubberized Undercoating Black Beauty - an elastic anti-corrosion coating with a rubber filler and bitumen. It has excellent adhesion and covering power.

The product is provided with an extension tube. Intended for treating the underbody, the wheel arches, the wings and the lower surfaces of the sills of the vehicle.

Suitable for treating the inner surfaces of the body reinforcements, the bonnet and the doors.

In professional body repair it is used for

protecting welded seams from the inside of the panels;protecting the inner surfaces of new body panels (for treating wings, doors, bonnets and boots before installation on the vehicle).

Advantages

It displaces water from the gaps and joints between the body panels, forms a waterproof layer.It retains its plasticity and does not crack at sub-zero temperatures.It does not chip or wear away during use.It dries quickly.It significantly reduces road noise, lowers the vibration of body elements.It increases the comfort of operating the vehicle.

Method of application

Use the product at an ambient temperature of from +10 to +30 °С.Clean the surfaces to be treated of old anti-corrosion coating that has peeled off, of dust and of dirt.Clean rusty areas with a metal brush, treat them with a rust converter and degrease them with petrol.Let the surface dry.Shake the can thoroughly (until the balls knock distinctly).Apply the anti-corrosion coating in an even thin layer in parallel strips, overlapping each preceding strip by 2-3 cm.Let the first layer dry for 20-30 minutes and apply the next layer using the same method. For the first treatment it is advisable to apply 2-3 layers.

For subsequent repairs - 1-2 layers. To apply the anti-corrosion coating to the inner surfaces of the body reinforcements, the bonnet and the doors use the extension tube supplied.Dry the protective coating for 24 hours (not less than three).After applying the last layer it is necessary to remove the overspray from the paintwork.After partial use clear the sprayer for 1-2 seconds, having turned the can over with the valve pointing downwards and pressed it.

Attention! Do not apply to the parts of the exhaust system!

Specifications

Fluid profile

BrandHi-Gear
TypeCoating
Product typeAerosol
Package482 L
FormLiquid
Country of originUSA
Package unitL

Vendor offers

ADAM finds the vendor

No vendor yet. ADAM finds one and replies within 24 h.

Questions & answers

What farmers ask most

  • Match the API/ACEA classifications shown in the specs against your engine manufacturer's recommendation (in the service manual). Tier 4 Final diesels require low-SAPS or mid-SAPS oils — this is always called out in the name.

Product specifications are compiled from publicly available manufacturer sources and are provided for guidance only — confirm all details with the vendor before purchase. Brand names, logos and trademarks are the property of their respective owners; a listing on ADAM does not imply affiliation, sponsorship or endorsement.

+380 (67) 419-07-94

Contentsquare stores its data in the EU (Ireland). Google Analytics transfers data to the United States, under EU Standard Contractual Clauses.