Bumper paint Hi-Gear Bumper Coating Flexible

Bumper Coating Flexible - a product intended for the independent and rapid repainting of the lost factory colour of the polymer parts of a car, primarily the bumper, and also mouldings and other decorative elements. 

Advantages

It has high adhesive properties to the surface to be painted. The paint contains plasticisers and elasticisers. It does not require prior priming. The aerosol packaging is practical and functional. It can be used in the home. Method of use:

Clean the surface to be treated and work it over with sandpaper. On a small area, check the paint and the solvent for compatibility. Degrease using white spirit. Mask off the areas that are not to be treated. Shake the can thoroughly to mix the paint. Spray the paint in a thin layer. The distance to the surface being treated should be 15-20 centimetres Each new strip should be applied overlapping the previous one by 2-3 centimetres. To obtain a good-quality colour, 2-3 layers are sufficient. The drying time of each is 15 minutes. The paint must be mixed during the work, for which the can is shaken. The time required for complete drying is 1 hour. After finishing the work it is necessary to clean the nozzle of the can. To do this, turn it upside down and hold the sprayer in operation for a few seconds.

Flammable! Use in well-ventilated rooms at a temperature of +15 to +20 degrees.