Black anti-gravel Hi-Gear Advanced Peelable Coating

An effective product for protecting the bumper, the bonnet and the lower part of the doors against scratches, chips, bitumen and the abrasive effect of sand, small stones and snow. The composition dries quickly and creates a wear-resistant, elastic film which, if necessary, is removed by hand without difficulty and at the same time leaves no marks. The product may be applied to non-ferrous metals and alloys, painted and lacquered surfaces, plastic and glass.

Method of application:

apply the composition within the temperature range from +15 to +25 °C. It is recommended to treat in a place with moderate humidity where direct sunlight does not reach; clean and dry the area in advance, and protect the surface that is not being treated using masking tape; shake the can vigorously and apply the composition from a distance of approximately 25 cm; up to 4 layers may be applied, drying each layer for 15-30 min; shake the bottle periodically during application; the product will dry completely in approximately 4 hours; removal of the coating must be carried out starting from the corners of the part.