Enzim·Bio-fertilizers
Celulad L
Celulad L — a complex microbiological-enzymatic decomposer for speeding up humification and mineralization of plant residues; it is applied to chopped crop residues immediately after harvest.
Main advantages
- Small grains, oilseed rape, soybean 1.5–2.0 l/ha — after harvest
- Maize, sunflower 1.5–3.0 l/ha — on residues in the field
- Fruit and berry crops 3.0–5.0 l/ha — twice a year
- Residues 30–100 mm — chopped, evenly spread
- Chemical fungicides in the mix — product incompatible
Overview
About this product
Celulad L — a microbiological-enzymatic decomposer of plant residues. On small-grain cereals, oilseed rape and soybean the rate is 1.5–2.0 l/ha at 200–400 l/ha of working solution, on maize and sunflower 1.5–3.0 l/ha at 300–500 l/ha, with incorporation into soil to 15 cm or rolling.
Residues must be chopped (30–100 mm) and evenly spread. On fruit and berry crops the rate is 3.0–5.0 l/ha twice a year, in autumn and spring, over fallen leaves and the crown or vine.
Air temperature from +5 °C to +45 °C at humidity above 75%, otherwise up to +35 °C. Incompatible with chemical fungicides.
Application
Rate, timing and crops
Rate
Small-grain cereals
- Application rate, l/ha
- 1.5-2.0
- Application method and working solution rates
- Spraying plant residues in the field, immediately after harvest, 200-400 l/ha, with subsequent incorporation of the product into soil to 15 cm, or rolling.
Oilseed rape
- Application rate, l/ha
- 1.5-2.0
- Application method and working solution rates
- Spraying plant residues in the field, immediately after harvest, 200-400 l/ha, with subsequent incorporation of the product into soil to 15 cm, or rolling.
Soybean
- Application rate, l/ha
- 1.5-2.0
- Application method and working solution rates
- Spraying plant residues in the field, immediately after harvest, 200-400 l/ha, with subsequent incorporation of the product into soil to 15 cm, or rolling.
Maize
- Application rate, l/ha
- 1.5-3.0
- Application method and working solution rates
- Spraying plant residues in the field immediately after harvest, 300-500 l/ha, with subsequent incorporation of the product into soil to 15 cm, or rolling.
Sunflower
- Application rate, l/ha
- 1.5-3.0
- Application method and working solution rates
- Spraying plant residues in the field immediately after harvest, 300-500 l/ha, with subsequent incorporation of the product into soil to 15 cm, or rolling.
Before adding the product to the working solution, shake the contents thoroughly! Before mixing components, it is advisable to test for sediment formation in a separate container.
- Timing
Immediately after harvest on chopped crop residues
Fruit and berry crops: twice a year, in autumn and spring
- Method
Plant residues must be chopped (30–100 mm) and evenly spread over the area
Immediately after application, incorporating the product into soil at 5–15 cm is recommended; with No-Till, roll the treated area with a roller
- Conditions
Apply at an air temperature from +5 °C to +45 °C at high air humidity (above 75%), otherwise up to +35 °C
Apply in a period of low solar activity (18.00–10.00) or in overcast conditions
- Tank mix
Compatible with most insecticides, herbicides, biological products, fertilizers
Incompatible with chemical fungicides
- Crops
- Small-grain cerealsOilseed rapeSoybeanMaizeSunflowerFruit and berry crops
Figures from the manufacturer, Enzim. Source page
Specifications
Nutrient composition
| Brand | Enzim |
|---|---|
| Type | Bio-fertilizer |
| Application | Soil |
| Target Crops | Cereals, Rapeseed, Soybean, Corn, Sunflower, Fruit crops, Berry crops |
| Manufacturer | ENZIM Biotech (завод «Ензим», м. Ладижин) |
Vendor offers
ADAM finds the vendor
No vendor yet. ADAM finds one and replies within 24 h.
Questions & answers
What farmers ask most
- Rates depend on crop, prior history, soil analysis and nutrient status. An agronomist sets the dose from this product's label — not an NPK-complex template of 150–300 kg/ha.
Related products
Other SKUs buyers consider here
Product specifications are compiled from publicly available manufacturer sources and are provided for guidance only — confirm all details with the vendor before purchase. Brand names, logos and trademarks are the property of their respective owners; a listing on ADAM does not imply affiliation, sponsorship or endorsement.