Agro.Bio·Humates
Potassium Humate + Phosphorus Agro.Bio
Potassium Humate + Phosphorus — a ballast-free humic fertilizer from leonardite with 15.0% humic and fulvic acids, potassium and phosphorus for seed treatment, foliar feeding and soil application.
Main advantages
- 15.0% humic and fulvic acids — the main active ingredient
- Chloride-free, ballast-free — per the maker
- Particles under 100 microns — do not clog nozzles
- Mixes with urea and UAN — shared tank mixes
- Seed, leaf, soil, irrigation — four application methods
Overview
About this product
Potassium Humate + Phosphorus — a ballast-free fertilizer and growth stimulant from leonardite, free of chlorides. It contains 15.0% humic and fulvic acids, 4.6% potassium and water-soluble phosphorus, pH 10.0.
Seed of cereals, grain legumes and industrial crops is treated at 0.5–1.3 l/t, and crops are sprayed at 0.25–0.3 l/ha. Before ploughing or cultivation, 2 l of product in 100 l of water per hectare is applied to the soil.
It combines with urea, UAN and many pesticides after a compatibility check; particles under 100 microns do not clog irrigation system nozzles.
Application
Rate, timing and crops
Rate
Wheat, barley, rye, oats, rice
- Application rates
- 0.5–1.3 l/t
- Treatment type
- Pre-sowing seed treatment
Wheat, barley, rye, oats, rice
- Application rates
- 0.25–0.3 l/ha
- Treatment type
- 1st spray at tillering
Wheat, barley, rye, oats, rice
- Application rates
- 0.25–0.3 l/ha
- Treatment type
- 2nd spray at flowering
Maize, peas, beans, chickpea, soybean
- Application rates
- 0.5–1.3 l/t
- Treatment type
- Pre-sowing seed treatment
Maize, peas, beans, chickpea, soybean
- Application rates
- 0.25–0.3 l/ha
- Treatment type
- 1st spray at emergence (3–5 leaves)
- Timing
Agricultural crops (wheat, rye, potato, etc.): at least 2 treatments per season; fruit and berry crops: 3 to 8
Primarily under plant stress
- Method
Seed treatment: 2% solution, soaking for 30 minutes
Foliar: the per-hectare rate is dissolved in 200–400 l of warm water
- Conditions
Water temperature not below 15–20 °C; with very hard water, first add urea to the water
Treat in the morning and evening at an air temperature of 10–25 °C
- Tank mix
Urea, UAN, many pesticides
Check tank mixes with fertilizers and pesticides for compatibility beforehand
- Crops
- WheatBarleyRyeOatsRiceMaizePeasBeansChickpeaSoybeanBuckwheatSunflowerOilseed rapeSugar beetPotatoCarrotTomatoPepperAubergineCourgetteCabbageCucumberApplePearCherryPlumGrapevinePumpkinMelonWatermelon
Figures from the manufacturer, Agro.Bio. Source page
Specifications
Nutrient composition
| Type | Humate |
|---|---|
Composition
| |
| pH value | 10.0 |
| Application | Seed treatment, Foliar, Soil, Fertigation |
| Target Crops | Cereals, Grain legumes, Corn, Soybean, Sunflower, Rapeseed, Sugar Beet, Potato, Vegetables, Fruit crops, Berry crops, Cucurbits |
| Manufacturer | Agro.Bio |
| Chloride-free | Yes |
| Humic acids, % | 15 |
| Potassium, % | 4.6 |
| Source material | Leonardite |
Vendor offers
ADAM finds the vendor
No vendor yet. ADAM finds one and replies within 24 h.
Questions & answers
What farmers ask most
- Rates depend on crop, prior history, soil analysis and nutrient status. An agronomist sets the dose from this product's label — not an NPK-complex template of 150–300 kg/ha.
Product specifications are compiled from publicly available manufacturer sources and are provided for guidance only — confirm all details with the vendor before purchase. Brand names, logos and trademarks are the property of their respective owners; a listing on ADAM does not imply affiliation, sponsorship or endorsement.