Agro.Bio·Humates
Sodium Humate + Phosphorus Agro.Bio
Sodium Humate + Phosphorus — an organic fertilizer and growth stimulant from leonardite without ballast salts, with 15.0% humic and fulvic acids, sodium and phosphorus for seed, leaf and soil.
Main advantages
- Humic acids 15.0% — a leonardite base
- No ballast salts — per the maker
- Spraying, sprinkling, aircraft — various application methods
- Particles under 100 microns — do not clog nozzles
Overview
About this product
Sodium Humate + Phosphorus — a complex organic fertilizer from leonardite without ballast salts, with humic and fulvic acids, sodium and phosphorus. It contains 15.0% humic acids and 4.6% sodium, pH 10.0.
For soaking seed of all crops, a 2% solution is prepared and the seed is kept in it for 30 minutes. For foliar feeding, 1–2 l of product per 200–400 l of water is applied by spraying, sprinkler irrigation or aircraft, and to the soil before ploughing 2 l per 100 l of water.
Treatments are repeated no more often than every 10–14 days.
Application
Rate, timing and crops
Rate
Wheat, barley, rye, oats, rice
- Application rates
- 0.5–1.3 l/t
- Treatment type
- Pre-sowing seed treatment
Wheat, barley, rye, oats, rice
- Application rates
- 0.25–0.3 l/ha
- Treatment type
- 1st spray at tillering
Wheat, barley, rye, oats, rice
- Application rates
- 0.25–0.3 l/ha
- Treatment type
- 2nd spray at flowering
Maize, peas, beans, chickpea, soybean
- Application rates
- 0.5–1.3 l/t
- Treatment type
- Pre-sowing seed treatment
Maize, peas, beans, chickpea, soybean
- Application rates
- 0.25–0.3 l/ha
- Treatment type
- 1st spray at emergence (3–5 leaves)
- Timing
- Treatments are repeated no more often than every 10–14 days
- Method
Seed treatment: 2% solution, 0.5–1.3 l of product per 10 l of solution, 30 minutes
Cuttings, bulbs, tubers of ornamental crops: 0.1–0.125 l of product per 1 l of solution
- Conditions
Water temperature not below 15–20 °C; with very hard water, first add urea to the water
Treat in the morning and evening at an air temperature of 10–25 °C
- Tank mix
Mineral fertilizers
Pesticides, as an anti-stress component
- Crops
- WheatBarleyRyeOatsRiceMaizePeasBeansChickpeaSoybeanBuckwheatSunflowerOilseed rapeSugar beetPotatoCarrotTomatoPepperAubergineCourgetteCabbageCucumberApplePearCherryPlumGrapevinePumpkinMelonWatermelon
Figures from the manufacturer, Agro.Bio. Source page
Specifications
Nutrient composition
| Type | Humate |
|---|---|
Composition
| |
| pH value | 10.0 |
| Application | Seed treatment, Foliar, Soil, Fertigation |
| Target Crops | Cereals, Legumes, Sunflower, Rapeseed, Sugar Beet, Potato, Vegetables, Fruit crops, Berry crops, Cucurbits |
| Manufacturer | Agro.Bio |
Vendor offers
ADAM finds the vendor
No vendor yet. ADAM finds one and replies within 24 h.
Questions & answers
What farmers ask most
- Rates depend on crop, prior history, soil analysis and nutrient status. An agronomist sets the dose from this product's label — not an NPK-complex template of 150–300 kg/ha.
Product specifications are compiled from publicly available manufacturer sources and are provided for guidance only — confirm all details with the vendor before purchase. Brand names, logos and trademarks are the property of their respective owners; a listing on ADAM does not imply affiliation, sponsorship or endorsement.