Engine oil Xtreme TRUCK SYNT 10W-40

Xtreme TRUCK SYNT 10W-40 a top-quality all-season UHPDO synthetic oil, made from a synthetic base oil obtained by the hydroisomerisation process. The quality of the base oil and specially selected additives provide excellent performance characteristics of the product. 

This oil has the following main properties:

low-temperature properties to ensure fast lubrication on a cold start, keeps the engine clean and prevents oxidation, exceptional protection against sticking, deposits and sludge, good detergent and dispersant properties for the best soot control, wear control and very limited bore polishing for maximum engine service life. Xtreme TRUCK SYNT 10W-40 is ideally suited for a vehicle fleet where products with different ACEA specifications are required. This makes it possible to use only one product for the E4- E7 specifications. The oil is used in high-speed diesel engines, meets the Euro-1, Euro-2, Euro-3, Euro-4 and Euro-5 requirements for the emission of toxic substances and is intended for severe operating conditions. The oil is used for engines without particulate filters, and also for some engines equipped with an exhaust gas recirculation system (EGR) and a selective catalytic reduction system (SCR) to reduce the amount of nitrogen oxides in the exhaust gases.

The use of this product can provide the following advantages:

improved engine cleanliness and protection against wear,better protection against sticking,excellent fluidity at low temperatures,extended oil change intervals,energy saving,increases the engine service life and reduce fuel consumption compared with other engine oils. Approvals and specifications:

ACEA E4-E7 / B3-B4 / A3 API CG-4/CH-4/CI-4/ SLMB 228.5/228.3    VOLVO VDS-2 / VDS-3    MAN M 3275-M 3277 CRT     RENAULT RXD LEVEL       MTU TYPE 3 DEUTZ DQC III – 05     SCANIA LDF-2 CharacteristicsTest method ValuesViscosity grade   10W-40Density at15°C, Kg/m3ASTM D 1298  860.1Viscosity at 100°C, cStASTM D 44514.4Viscosity indexASTM D 2270160Pour point, °CASTM D 97- 34Flash point, °CASTM D 92220