CRC aerosol air flow meter cleaner Air Sensor Clean pro

CRC AIR SENSOR CLEAN PRO restores efficiency, improves operation and increases the reliability of the mass air flow sensors (Mass Air Flow Sensors) used in modern injection engines. It cleans quickly and effectively both the thermistor and the heated wire or film. CRC AIR SENSOR CLEAN PRO is an effective, highly purified, precision solvent developed in accordance with modern requirements. The product is based on fast-drying naphthenic solvents, free of chlorinated glycol and other chlorinated components.

Properties:

Cleans the evaporator and the chimneys of all types of contamination.Penetrates quickly even into very narrow pores and cracks in the surface.Ensures optimal operation of the injection engine during starting.Ensures that the processor receives correct information for regulating the formation of the fuel mixture depending on the engine load.Provides more accurate information on gear shifting to the automatic transmission control unit.Quickly cleans and removes all contamination from the sensor.Ozone-safe product (ODP = 0.00).Periodic scheduled use (especially after replacing the air filter) maintains efficiency at the proper level and extends the service life of the sensor.The product does not conduct current and is not a source of corrosion.It evaporates completely, leaving no traces or residue.The product is safe for all metal surfaces, most rubber products, plastics and coatings. Before use, test in advance on sensitive plastic surfaces, bonded parts and parts that are under mechanical stress.The aerosol cans are fitted with a 360° valve (works in any position of the can) and an extension nozzle tube for ease of use.The aerosol is pressurised with non-flammable (without impurities) СО2 propellant, which means a useful product content of up to 97% of the can volume (that is, 30% more than when using conventional hydrocarbon propellants). Application:

Specially developed for mass air flow sensors of various types:

Wire (Filament)Film After replacing the air filter, cleaning of the air flow sensor with CRC Air Sensor Clean Pro before starting the engine is recommended.